Nortel RLC, Installation And Administration Manual

Page: 120 / 466

94 RLC Installation and Administration Guide
Installing the RLC Standard 4.0
6 Do one of the following:
Establishing a serial connection
To establish a serial connection:
1 From the Menu Bar, choose Connect
→
Logon Unit
→
Serial.
Result: The Serial Port Configuration dialog box displays, similar to the
following:
2 Enter the COM port number the unit is connected to in the Port Number
field, and then click on the
OK button.
Result: The User Authentication for Serial Mode dialog box displays.
3 Enter guest in the Login Name field.
4 Enter the default password, guest123 , in the Password field.
Note: Nortel recommends that you do not change the password until your
system is up and running.
5 Click on the OK button.
Result: Configuration Manager initiates a connection attempt and displays
the following message:
Trying Connection
IF you want
to perform an THEN
offline configuration,
„
Choose View
→
Device Type
→
RLC.
„
Continue with “Performing configuration
with the Configuration Wizard” on page
96.
online configuration, continue with “Establishing a serial
connection” on this page.