Nortel Passport 8600 Series, Installation Manual, Page: 42 / 164

42 Ethernet Routing Switch 8600 module fundamentals
supports the IEEE 802.3 1998 Clause 28 Auto-Negotiation standard, the
two devices negotiate the highest possible data rate and the duplex mode
of operation.
For a list of Nortel-qualified GBICs, see “Nortel-qualified SFPs, XFPs, and
GBICs” (page 64) .
The following figure shows the location of the 8632TXE and 8632TXM
module LEDs.
Figure 15
8632TXE and 8632TXM module LEDs
The following table describes the 8632TXE and 8632TXM module LEDs.
Table 7
8632TXE and 8632TXM module LEDs
Type Label Color, State Meaning
Green, Steady The module completed the power-on
self-test and software initialization and is
operating normally.
Amber, Steady The module failed the power-on self-test.
Module Online
Off The module power is off. If the switch
power is on, the module is performing
its power-on self-test and software
initialization. A module in this state is not
yet functional.
Green, Steady The port is operating at 100 Mbps. 10/100
Off The port is operating at 10 Mbps.
Green, Steady The port is connected and the link is
operational.
Green, Blinking Data is passing through the port.
Port
Link/Act
Off The port is disabled or has no link.
Nortel Ethernet Routing Switch 8600
Installation — Modules
NN46205-304 02.02 Standard
16 June 2008
Copyright © 2008 Nortel Networks
.