Nortel Passport 5430, Installing And Operating Instructions, Page: 128 / 220

Installing and Operating the Passport 5430 Multiservice Access Switch
7-4
306308-A Rev 00
12.
Reinstall the PMC module on the replacement system processor card if
necessary.
a. Hold the PMC module with the connectors facing down.
b.
Place the PMC module on the system processor card and press down
on the PMC module to seat it in the socket
(Figure 7-4) .
Figure 7-4. Seating the PMC in the Socket
c.
Insert and tighten the 4 screws using a Phillips screwdriver to secure
the PMC to the system processor card
(Figure 7-5) .
FBR0054A
System
Processor