Nortel Nortel IP Phone 1120E, User Manual, Page: 135 / 206

While on an active call
135
Multiple calls On Hold
When you have more than one call on hold, use the navigation key to
highlight a call on the LCD screen. You can perform an action with that
call by using the
Action Context-sensitive soft key.
When you highlight a call that is not active, you can retrieve the call from
hold and make it active.You can also or join the call with the active call to
create a 3-way calling session. (See “Using 3-way calling” on page 136.)
Use the Switch Context-sensitive soft key to change a call on hold to the
primary call. If the primary call is active the system automatically puts that
call on hold and makes the previous call on hold an active call. (See
Figure 22.)
Figure 22: Secondary (Inactive) call highlighted
To access a call on hold when multiple calls are on hold:
1. Press the Up/Down navigation key to
highlight a call on hold.