MCS 5100 RTP Media Portal Basics
75
Copyright © Nortel Networks Limited 2006
Figure 34 Red Hat: Edit hard disk
3
Type
p
and press
Enter
to display existing partitions. If any exist,
type
d
to delete them. For example to delete partition 1, type
d
,
press
Enter
, type
1
, press
Enter
.
After deleting existing partitions, type
w
and press
Enter
to save
changes to the partition table.
4
Create the first partition. Type
n
and press
Enter
to create a
partition. To note the primary partition, type
p
and press
Enter
,
then type
1
and press
Enter
. Press
Enter
to accept the default
beginning block, and type
+1000M
and press
Enter
for the size.
C
ommand (m for help):
n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4):
1
First cylinder (1-35242, default 1):
<Enter>
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-35242,
default 35242):
+1000M
Disk Setup
To install Red Hat Linux, you must have at least one
partition of 150 MB dedicated to Linux. We suggest placing
that partition on one of the first two hard drives in your
system so you can boot into Linux with LILO.
/dev/sda - Seagate ST336938LW
Done
Edit
Back
Summary of Contents for NN10265-111
