Nortel Modular ICS 6.0, Manual

Page: 140 / 294

140 / Customizing your telephone
Modular ICS 6.0 System Coordinator Guide P0992640 03
Displays
The name of the feature assigned to a button
is displayed when you press the button.
SHOW
appears when there is more
information available. Press
£
or
SHOW
for
additional information.
If you are checking a speed dial button, enter
the three-digit speed dial code that you want
to check.
Enter the feature code, or press
¨
or
QUIT
to quit programming or
CLEAR
to clear the
numbers you have entered. The system
accepts the entry as soon as you enter a
valid feature code.
Press
²
and enter the feature code you
want to assign to the button. You cannot
enter invalid codes.
You have programmed a button with a
feature that was already programmed onto
another button. The feature has moved to the
button you just programmed. Its original
button is now blank.
Press the button you want to check. Press
²
or
EXIT
when you are finished.
Enter the number you want to program and
press
³
. To erase the button, just press
³
.
Enter the number you want to program and
press
OK
. To erase the button, just press
³
or
OK
.
For other displays, see Common feature displays on page 247.
<Feature name>
SHOW OK
Enter code:
F__
QUIT
CLEAR
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT
OK