2-28 Mounting the terminal
b) Slide your fingers along the edges of the card,
pressing the edges under the lip.
c) Position the card so that all its edges are covered,
instruction card
ID bezel
External
instruction
Cutout for
VFD
G. Installing a coin box
If the terminal does not have a coin box, install one.
Refer to Figure 2-18 and proceed as follows:
1.
Insert the coin vault key into the key slot at the lower
right side of the terminal and rotate the key clockwise to
unlock the compartment.
2.
Insert the T- or L-tool into the slot on the front of the
vault door and turn the tool counterclockwise 45 de
grees.
3.
Pull the tool and vault door away from the terminal.
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997
Summary of Contents for Millennium multi-pay M1211
