Nortel Meridian SL-100 SE, Replacement

Page: 41 / 338

FSP card replacement procedures 41
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT0X91
in Meridian Cabinet Trunk Module—ISDN
(continued)
3 Record information on FSP circuit breakers and network shelf
positions associated with the card you are replacing. Use the
following table to get this information.
4 Select the shelf associated with the FSP card you are replacing.
At the MAP terminal:
5 Access the PM level of the MAP display by typing
>MAPCI;MTC;PM
and press the Enter key.
6 Post the PM by typing
>POST pm_type pm_no
and press the Enter key.
where
pm_type
is the type of PM (LTC-I, DTC-I)
pm_no
is the number of the PM
7 Determine the state of the PM (active or inactive). Refer to step
3 to determine the correct units that correlate to the NT0X91AA
or NT0X91AE.
8 Manually busy the PM by typing
>BSY UNIT unit_no
and press the Enter key.
where
Card location map
FSP card
FSP card
position FSP circuit
breakers
Shelf position
NT0X91AA CD1 CB3, CB4 05, 33 - unit 0
NT0X91AE CD2 CB3, CB7,
CB8 19, 47 - unit 1
Note: A minimum of one shelf can be unequipped.