Nortel Meridian SL-100 SE, Replacement

Page: 292 / 338

MCRM-S card replacement procedures 292
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NTMX77
in an MCRM-S RCC2
(continued)
At the MAP terminal
23 Load the inactive RCC2 unit by typing the following string:
>loadpm unit rcc2_unit_no
and pressing the Enter key.
where
rcc2_unit_no
is the number of the RCC2 unit busied in Step 7.
24 Use the following information to determine where to proceed.
25 Use the following information to determine where to proceed.
26 Test the inactive unit by typing the following string:
> TST UNIT rcc2_unit_no
and pressing the Enter key.
where
rcc2_unit_no
is the number of the RCC2 unit loaded in Step 23
27 Use the following information to determine where to proceed.
28 Return the inactive RCC2 unit to service by typing the following
string:
> RTS UNIT rcc2_unit_no
If load Do
passed Step 25
failed Step 26
If you entered this proce-
dure from Do
alarm clearing procedures Step 33
other Step 26
If TST Do
passed Step 28
failed Step 34