Nortel Meridian SL-100 SE, Replacement

Page: 184 / 338

MCRM-S card replacement procedures 184
Meridian SL-100 SE Commercial Systems Card Replacement Procedures MSL15
NT6X69
in an MCRM-S RCC2
(continued)
14 Using your fingers or thumbs, push on the upper and lower
edges of the faceplate to ensure that the card is fully seated in
the shelf.
15 Close the locking levers.
16 Unseat the 6X69 card in slot 08 if working in unit 0, or in slot 20
if working in unit 1.
17 Reseat the 6X69 card in slot 08 if working in unit 0, or in slot 20
if working in unit 1.
At the MAP terminal
18 Use the following information to determine where to proceed.
19 Test the inactive unit by typing the following string:
>TST UNIT rcc2_unit_no
and pressing the Enter key.
where
rcc2_unit_no
is the number of the RCC2 unit busied in Step 8
If you entered this proce-
dure from Do
alarm clearing procedures Step 25
other Step 19