Nortel Meridian SL-100 SE, Replacement

Page: 158 / 338

158 MCRM-S card replacement procedures
555-4031-547 Standard 12.02 July 2002
NT2X10
in an MCRM-S RMM
(continued)
At the MAP terminal
13 Test the RMM by typing the following string:
>TST
and pressing the Enter key.
14 Use the following information to determine where to proceed.
15 Return the RMM to service by typing the following string:
>RTS
and pressing the Enter key.
16 Use the following information to determine where to proceed.
17 Send any faulty cards for repair according to local procedure.
18 Record the following items in office records:
• date the card was replaced
• serial number of the card
• symptoms that prompted replacement of the card
Go to Step 21.
19 Return to the alarm clearing procedure or other procedure you
were following that directed you to this procedure. If necessary,
go to the point where a faulty card list was produced, identify the
next faulty card on the list, and go to the appropriate card
replacement procedure for that card in this manual.
20 Obtain further assistance in replacing this card by contacting the
personnel responsible for a higher level of support.
If TST passed Do
passed Step 15
failed Step 19
If RTS Do
passed Step 17
failed Step 20