manualshive.com logo in svg

Nortel Meridian M3900, Reference Manual

Share
Download
Nortel Meridian M3900 Reference Manual Download Page 98

98   Installation

555-4001-136   Standard   05.06   May 2002  

Figure 22
How to install the alternate key caps

As Figure 22 shows, place the tips of the tool into the slots at the right 
and left of the key, grip tightly and pull straight upward.

Procedure 37
Install key caps

1

Fit the two small elastomer posts into two slots on the underside on the keys 
and firmly press downward.

2

The key releases immediately after applying pressure.

Note:

If the key does not release, remove it. Attempt the installation again, 

This procedure is now complete

making sure that the posts and the slots are properly aligned.

Full Duplex Handsfree (FDHF) Accessory on the M3904

This section shows how to install and use the Full Duplex Handsfree 
(FDHF) Cartridge (NTMN72AA) with your M3904 Release 3 Meridian 
Digital Telephone (NTMN34GA). The FDHF cartridge enables 
simultaneous two-way communication during a handsfree call.

Note: The FUll Duplex Handsfree accessory is only supported on 
the M3904 Release 3 or later telephone. A Full Duplex Handsfree 
compatible version of the M3904 Release 2 telephone is not 
available.

G100102

Summary of Contents for Meridian M3900













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands