manualshive.com logo in svg

Nortel Meridian M3900, Reference Manual

Share
Download
Nortel Meridian M3900 Reference Manual Download Page 23

 23

Meridian SL-100 M3900 Meridian Digital Telephones Reference Guide

Feature keys

Purpose

This chapter describes the look and functions of the feature keys.

Fixed feature keys

The M3900 Series Meridian Digital Telephone sets have feature keys 
that are pre-labeled with the assigned feature. These keys appear on 
the telephone with text or icon labels. Telephone icon key labels are 
available in specific markets. An asterick (*) indicates optional key caps 
available with the M3905. Table 2 shows the keys, text, and icons.

Table 2
Feature key text and icon labels

 Feature Key

Text label

Icon label

Activity Key (M3905 only)*

Answer Agent (M3905 only)*

Answer Emergency (M3905 only)

Application
Apps (M3905 only)

Call Agent*

Call Log (M3903 only)

Call Supervisor (M3905 only)

Activity

Ans Agent

Ans Emerg

Applications

Agent

Call Log

Supervisor

Summary of Contents for Meridian M3900













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands