Nortel Contivity 100, Setting Up

Page: 43 / 78

Chapter 2 Contivity 100 unit hardware installation 43
Setting Up the Contivity 100 Unit
2
Insert each of the four screws through the holes in the bracket and into the
wood wall
(Figure 6) . Use only wood screws.
Figure 6 Mounting the Contivity 100 unit on the wall
3 Screw in the screws.
4
Repeat steps 1 – 3 to attach the other mounting bracket to the wall.
Mounting the Contivity 100 unit on a drywall or cement wall
To mount the Contivity 100 unit on a drywall or cement wall, you need a drill and
a 1/4-inch drill bit (not included).
Mounting the unit on a drywall or cement wall, is a two-part process. You will:
1 Prepare a drywall or cement wall for mounting.
Pow
er On
10/100 Link/Activity
HDX/FDX
1
2
3
4
5
6
7
8
9864FC
Contivity
100