Nortel business policy switch 2000, User Manual

Page: 268 / 412

268 Chapter 3 Using the console interface
208700-C
Table 50 describes the Software Download screen fields.
Table 50 Software Download screen fields
Field Description
BPS 2000 Image
Filename The Business Policy Switch software image load file name.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
BPS 2000
Diagnostics
Filename The Business Policy Switch diagnostics file name.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
450 Image
Filename The BayStack 450 software image load file name. Displays in a mixed stack environment.
Default Value Zero-length string
Range An ASCII string of up to 30 printable characters
TFTP Server IP
Address The IP address of your TFTP load host.
Default Value 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Start TFTP Load
of New Image Specifies whether to start the download of the switch software image (default is No).
Use the spacebar to toggle the selection to the one you want.
Press [Enter] to initiate the software download process.
NOTE: The software download process can take up to 60 seconds to complete (or more
if the load host path is congested or there is a high volume of network traffic).
To ensure that the download process is not interrupted, do not power down the switch for
approximately 10 minutes.
Default Value No
Range No, BPS 2000 Image, BPS 2000 Diagnostics, 450 Image, BPS 2000
and 450 Image