Nortel business policy switch 2000, User Manual

Page: 162 / 412

162 Chapter 3 Using the console interface
208700-C
IP Configuration/Setup screen
The IP Configuration/Setup screen ( Figure 53 ) allows you to set or modify the
Business Policy Switch IP configuration parameters. Data that you enter in the
user-configurable fields takes effect as soon as you press [Enter].
To open the IP Configuration/Setup screen:
➨
Choose IP Configuration/Setup (or press i) from the main menu.
Figure 53 IP Configuration/Setup screen
Table 11 describes the IP Configuration/Setup screen fields.
Note:
The read-only fields in this screen are updated based on the BootP
mode specified in the BootP Request Mode field. (See “Choosing a
BootP request mode ” on page 164 for more information.)
IP Configuration/Setup
Unit [ 1 ]
BootP Request Mode: [ BootP When Needed ]
Configurable In Use Last BootP
--------------- ------------ ---------------
In-Band Stack IP Address: [10.30.31.108] 10.30.31.108 0.0.0.0
In-Band Switch IP Address: [10.30.31.106] 0.0.0.0
In-Band Subnet Mask: [255.255.255.0] 255.255.255.0 0.0.0.0
Default Gateway: [ 0.0.0.0 ] 0.0.0.0 0.0.0.0
IP Address to Ping: [ 0.0.0.0 ]
Start Ping: [ No ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.