Nortel BSR222, Configuration, Page: 395 / 451

Chapter 22 Maintenance 395
Nortel Business Secure Router 222 Configuration — Basics
Figure 161 DHCP Table
Table 112 describes the fields in Figure 161 .
F/W Upload screen
Find firmware at www.nortel.com/index.html in a file that usually uses the system
model name with a *.bin extension. The upload process uses FTP (File Transfer
Protocol) and can take up to two minutes. After a successful upload, the system
reboots.
Table 112 DHCP Table
Label Description
# This is the index number of the host computer.
IP Address This field displays the IP address relative to the # field listed above.
Host Name This field displays the computer host name.
MAC Address This field shows the MAC address of the computer with the name in
the
Host Name field.
Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of
six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select an entry’s check box to have the Business Secure Router
always assign the selected entries IP addresses to the corresponding
MAC addresses (and host names). After you click
Apply , the MAC
address and IP address also display in the LAN Static DHCP screen
(where you can edit them).
Refresh Click Refresh to renew the screen.