Nortel BSR222, Configuration, Page: 361 / 451

Chapter 19 UPnP 361
Nortel Business Secure Router 222 Configuration — Basics
Figure 135 Configuring UPnP
Table 99 describes the fields in Figure 135 .
Table 99 Configuring UPnP
Label Description
Device Name This identifies the device in UPnP applications.
Enable the Universal Plug
and Play (UPnP) feature Select this check box to activate UPnP. Be aware that
anyone can use a UPnP application to open the WebGUI's
logon screen without entering the Business Secure
Router's IP address (although you must still enter the
password to access the WebGUI).
Allow users to make
configuration changes
through UPnP Select this check box to allow UPnP-enabled applications
to automatically configure the Business Secure Router so
that they can communicate through the Business Secure
Router. For example, by using NAT traversal, UPnP
applications automatically reserve a NAT forwarding port
in order to communicate with another UPnP enabled
device; eliminating the need to manually configure port
forwarding for the UPnP enabled application.
Allow UPnP to pass through
firewall Select this check box to allow traffic from UPnP-enabled
applications to bypass the firewall.
Clear this check box to have the firewall block all UPnP
application packets (for example, MSN packets).
Apply Click Apply to save your customized settings and exit this
screen.
Reset Click Reset to begin configuring this screen afresh.