Page 6 of 8
Service:
604 -856- 9155
Email:
CCR Tree Setup and Changes
Making changes to a CCR Tree involves
4
steps
:
1.
Disabling
the Tree
2.
Making Changes
to the Tree
3.
Saving
the Changes
Important N
OTE
: You
MUST
save tree before exiting the system
4.
Re-Enabling
the Tree
1.
Disable the Tree:
1.
Press
Feature 983
2.
Enter Log Code:
738662
, press
Ok
3.
Enter Password:
266344
4.
Press
AA
5.
Press
Table
,
enter
1
,
press
OK
twice
6.
Press
Next
until you see:
CCR Tree 1
(or 2 depending on how many trees you are using)
7.
Press
Chng
, then
Disable
8.
Press
* *
(will skip you to step 3 of next instructions) or Press
Rls
to exit programming
2.
Make Changes to the Tree
:
1.
Press
Feature 983
2.
Enter Log Code:
738662
, press
Ok
3.
Enter Password:
266344
4.
Press
Othr
,
press
CCR
, press
Admin
5.
Enter
Tree Number Number
(usually 1 if only using one tree)
,
press
OK
6.
Press
Chng
7.
Enter the
Path Number
you want to change, then press
OK
(see below)
Note: Path 0
is where you record the menu options (which plays immediately after the introduction
greeting (recorded on page 5))
Example:
Path 0
:
Press
Rec
and then
Rec
again
For “store and service hours”, press 1.
(goes to Path 1)
For “our company directory”, press 2
(goes to Path 2)
For “Sales”, press 3
(goes to Path 3)
For
, press 4
(goes to Path 4)
For
, press 5
(goes to Path 5)
For all other inquiries, press 0
Path 1
:
Press
Info,
press
Rec
Our regular business hours are
We are located at
Our fax number is
Please visit us online at www
