1-6
Installing the Wireless AP7220
Nortel Networks Confidential
Copyright
2004 Nortel Networks
nnn-nnnn-nnn
Draft
01.00
March 2004
Figure 1-3
Optional accessories
Installation Overview
1
Before installing the unit, review the
“Limitations and Restrictions”
and
“Safety Guidelines”
at the start of this chapter.
Installation involves the following tasks:
•
Review
“Installation Pre-requisites”
•
Review
“Physical Installation Requirements”
•
Review
“Installation Scenarios and Flowchart”
These tasks are described briefly below.
Installation Pre-requisites
The AP7220 is intended for installation as part of a Wireless Mesh Network.
Before the AP7220 unit is installed and powered up, ensure that the
procedures described in the Planning and Engineering Guide have been
performed.
Physical Installation Requirements
The AP7220 unit is designed to be installed vertically with the baseplate
facing down (in indoor or outdoor locations).
Installation Guide
Ethernet cable
Ballmount adapter
Omnimount bracket
AC connector
Hex wrench
Snap-on Ferrite
Summary of Contents for 7220
Page 2: ...test ...
Page 25: ...test ...
