General switch administration using the Command Line Interface
187
The syntax for the
SNTP server primary address
command is
sntp server primary address <A.B.C.D>
Run the
SNTP server primary address
command in Global
Configuration command mode.
"SNTP server primary address parameters" (page 187)
describes the
parameters for this command.
SNTP server primary address parameters
Parameters and
Variables
Description
<A.B.C.D>
Enter the IP address of the primary NTP server in
dotted-decimal notation.
SNTP server secondary address command
The
SNTP server secondary address
command specifies the IP
addresses of the secondary NTP server.
The syntax for the
SNTP server secondary address
command is
sntp server secondary address <A.B.C.D>
Run the
SNTP server secondary address
command in Global
Configuration command mode.
"SNTP server secondary address parameters" (page 187)
describes the
parameters for this command.
SNTP server secondary address parameters
Parameters
Description
<A.B.C.D>
Enter the IP address of the secondary NTP server in
dotted-decimal notation.
No SNTP server command
The
no SNTP server
command clears the NTP server IP addresses. The
command clears the primary and secondary server addresses.
The syntax for the
no SNTP server
command is
no sntp server {primary | secondary}
Run the
no SNTP server
command in Global Configuration command
mode.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500
02.01
Standard
5.0
23 February 2007
Copyright © 2007, Nortel Networks
Nortel Networks Confidential
.
