Nortel 425-24T, Configuration Manual, Page: 395 / 488

Chapter 12 Configuring the switch using Web-based management 395
System Configuration Guide
Table 148 describes the fields on the Software Download page.
2 Type information in the text boxes, or select from a list.
3
Click Submit .
The software download process automatically completes without user
intervention. The process erases the contents of flash memory and replaces it
with a new software image. Take care not to interrupt the download process
until after it runs to completion (the process can take up to ten minutes,
depending on network conditions).
When the download process is complete, the switch automatically resets and
the new software image initiates a self-test.
During the download process, the Ethernet Switch 325/425 will not be
operational. You can monitor the progress of the download process by
observing the LED indications.
Table 149 describes the LED indications displayed during the software download
process.
Table 148 Software Download page fields
Fields Range Description
Current Running Version The version of the current running software.
Local Store Version The local version of the software in the flash
memory.
Diagnostics Filename 1..30 Type the diagnostics filename.
TFTP Server IP Address XXX.XXX.XXX.XXX Type the IP address of your TFTP load host.
Download Option (1) No
(2) Image
(3) Diagnostics Choose the software image to load.
Note:
The LED indications described in Table 149 apply to a 24-port
switch model. Although a 48-port switch provides similar LED
indications, the LED indication sequence is associated within the 48-port
range.