Nortel 425-24T, Configuration Manual, Page: 357 / 488

Chapter 9 Configuring the switch using Device Manager 357
System Configuration Guide
Figure 142 Edit Chassis dialog box — Custom Banner tab
To create a Custom Banner:
1 In the Banner tab, click on the custom radio button, and then click Apply .
2 Click on the Custom Banner tab (Figure 142) .
3 In the Custom Banner tab, make the changes to the lines of the banner that
you want to create, and click Apply . The custom banner is 15 lines high and
can be up to 80 characters long.
To check that the custom banner is set in Telnet:
1 In the Main menu, click on Device > Telnet .
The Telnet window opens (Figure 143) with the custom banner displayed.