Nortel 425-24T, Configuration Manual, Page: 348 / 488

348 Chapter 9 Configuring the switch using Device Manager
320985-A Rev 01
Figure 135 Edit Chassis dialog box — Stack Info tab
Table 131 describes the Stack Info tab fields.
Table 131 Stack Info tab fields
Field Description
Descr A description of the component or subcomponent. If not available, the
value is a zero length string.
Location The geographic location of a component in a system modeled as a
chassis, but possibly physically implemented with geographically
separate devices connected together to exchange managment
information. Chassis modeled in this manner are sometimes referred to
as virtual chassis. An example value is: '4th flr wiring closet in blg A'.
Note: 1. This object is applicable only to components that can be found
in either the Board or Unit groups. If the information is unavailable, for
example, the chassis is not modeling a virtual chassis or component is
not in Board or Unit group, the value is a zero length string.
2. If this object is applicable and is not assigned a value through a SNMP
SET PDU when the row is created, the value will default to the value of
the object s5ChasComSerNum.
LstChng The value of sysUpTime when it was detected that the component/
sub-component was added to the chassis. If this has not occurred since
the cold/warm start of the agent, then the value is zero.