manualshive.com logo in svg

Nortel 425-24T, Configuration Manual, Page: 203 / 488

Share
Download
Nortel 425-24T Configuration Manual Download Page 203

Chapter 5 Using the Web-based management interface

203

System Configuration Guide

 

Tools are provided in the menu to assist you in navigating the Web-based 
management interface. 

Table 42

 describes the icons that appear on the menu.

Administration

System Information
Quick Start
Security
Logout
Reset
Reset to Defaults

Support

Help
Release Notes
Manuals
Upgrade

Caution: 

Web browser capabilities such as page bookmarking, refresh, 

and page forward and page back, function as they would in any other 
Web site. However, these capabilities do not enhance the functionality of 
the Web-based management interface. Nortel recommends that you use 
only the navigation tools provided in the management interface.

Table 42   

Menu icons

Button or icon

Description 

This icon identifies a menu title. Click on this icon to display its 
options.

This icon identifies a menu title option. Click on this icon to display 
the corresponding page.

This icon identifies a menu title option with a hyperlink to related 
pages.

This icon is linked to an action, for example, logout, reset, or reset 
to system defaults.

Clicking on the Nortel logo opens the corporate home page in a 
new Web browser. 

Table 41   

Main headings and options (continued)

Main menu titles

Option

Summary of Contents for 425-24T









































































































































































































































































































































































































































































































Reviews:

No comments