Nortel 4145Ex, User Manual

Page: 10 / 68

10
• Place the handset in the charger.
For correct charging, be sure the
room temperature is between 0°C
and 25°C. Do not place the
handset in direct sunlight. The
battery has a built-in heat sensor
which will stop charging if the
battery temperature is too high.
When charging, the display shows
the charging status in line 3. The
display goes back to normal mode
when fully charged. It will not
vibrate. Auto-answer is inactive.
The handset reacts normally for
incoming calls.
It is necessary to recharge the battery
when the display shows
BATTERY
LOW
, or if the handset cannot be
turned on. When the battery is fully
discharged, up to 10 minutes may
pass before charging begins (display
lights up). When the charger begins
the charging, status is shown in the
display.