Nortel 1002rp, Maintenance And Diagnostics

Page: 74 / 218

Using CallPilot Manager to monitor hardware Standard 1.11
74 CallPilot
Table 12: Component sections
Section Description
General This section shows general technical information about
the selected component. This typically includes the
following details:
„
the name, class, type, series, or version of a
component
„
various capabilities of a component (for example,
whether a component is removable)
Note: This section does not appear for all components.
Maintenance This section shows the state of the selected component.
Use this section to start and stop a component before
running a diagnostic test.
This section appears only for components on which you
are allowed to perform maintenance administration.
For more information about working with component
states, see the following sections:
„
“Viewing component states” on page 76
„
“Starting and stopping components” on page 79
Diagnostics Use the Diagnostics section to run one or more
diagnostic tests, or to view the results of the last
diagnostic tests that were run on the selected
component.
This section appears only for components on which you
are allowed to run diagnostics.
For more information about running diagnostics, see the
following sections:
„
“Running integrated diagnostics” on page 83
„
“Viewing the last diagnostic results” on page 86