Nortel 1000E PRI Installation And Commissioning Manual Download Page 140

Page: 140 / 162

140

Reports, upgrades, and backups

Procedure 58
Performing a software upgrade through upload

Step

Action

On the Home - System Overview window, click Upgrades >
Upgrade the Software.

The window shown in

Figure 41 "Upgrade the Software window

from a PC" (page 140)

appears.

Figure 41
Upgrade the Software window from a PC

Click Browse and select the software file.

Click Upload.

To complete the installation of the software, click Upgrade &
Restart.

The E1/T1 card installs the new software and restarts the
system. Because the system restarts, your Web session ends.
You must log on again to resume working through the Web
interface

If the upgrade fails, or if you want to check the status of the
upgrade, check the details on the View Last Upgrade Details
window. See

“Check software upgrades” (page 140)

--End--

Check software upgrades

To check the status of the last software upgrade, and to confirm if an
upgrade succeeded or failed, follow

Procedure 59 “Checking the status

of software upgrades” (page 141)

Nortel Communication Server 1000

Media Gateway 1000E PRI Gateway Installation and Commissioning

NN43041-311 04.01

4 June 2010

Summary of Contents for 1000E PRI



































































































































































Search results

Summary of Contents for 1000E PRI

Reviews:

Related manuals for 1000E PRI

Brands by name

Popular brands

Nortel 1000E PRI, Installation And Commissioning Manual

Search results

Summary of Contents for 1000E PRI

Reviews:

Related manuals for 1000E PRI

Brands by name

Popular brands