7
Copyright © 2019 Nortek Security & Control LLC
Burglary Protection
To detect an intrusion, ensure the GC3 Panel is in the
System Ready to Arm
state (see "Bypass Sensors" on
page 9
). Then, arm the system.
Arm the System (Stay Mode)
Apply this mode when people and/or pets will be staying inside. Typically, this mode arms the premises' perimeter zones (for example, doors and windows) and
leaves the interior zones (for example, motion detectors) disarmed.
To arm the system:
1
2
3
IMPORTANT:
Consult your installer to determine if the
Quick Exit
feature is enabled on your system. When
Quick Exit
is allowed and
the system is armed in Stay Mode, you have the option of tapping the
Quick Exit
button on the System Armed screen to start the
Exit
Delay
countdown. This gives you time to exit the premises without having to disarm the system. At the end of the countdown, the system
automatically re-arms itself in Stay Mode.
Tap
Arm Stay
. The system announces,
“Arming Stay.”
During the countdown, you have the option to
tap
Silence
which will extend the length of the
timer and silence the audible countdown.
After the countdown expires, the system is
armed. The system announces, “System
Armed Stay.”
