Camera 01
Camera 02
Camera 03
Camera 04
Camera 06
Camera 05
Camera 07
Camera 08
Camera 09
AC100~240V
50/60Hz
LAN
USB 3.0
LAN/WAN
#1 ~ 8 or 16
PoE
VGA
HDMI
DIGITAL I/O
10
11
12
Please do not connect the NVR's PoE ports to non-PD* devices (such as an Ethernet switch LAN port). The Ethernet control circuits may not be compatible.
*
PD = A Powered Device designed to receive power source from a PoE connection such as network cameras.
Secure the chassis to rack posts using two screws on
each side.
The front side USB port supports a wired keyboard,
mouse or a USB jump drive.
9
8
NVR ports and connections.
Configure using the onboard software.
Copyright © 2022 Nortek Security & Control LLC
10030185 Rev-B
Limited Warranty
This Nortek Security & Control LLC product is warranted against defects in
material and workmanship for twenty-four (24) months. This warranty extends only
to wholesale customers who buy direct from Nortek or through Nortek’s normal
distribution channels. Nortek Security & Control LLC does not warrant this product to
consumers. Consumers should inquire from their selling dealer as to the nature of the
dealer’s warranty, if any.
There are no obligations or liabilities on the part of Nortek Security & Control LLC for
consequential damages arising out of or in connection with use or performance of this
product or other indirect damages with respect to loss of property, revenue, or profit,
or cost of removal, installation, or reinstallation.
All implied warranties, including implied warranties for merchantability and implied
warranties for fitness, are valid only until the warranty expires. This Nortek Security &
Control LLC Warranty is in lieu of all other warranties express or implied.
All products returned for warranty service require a Return Authorization Number
(RA#). Contact Nortek Security & Control Returns at 1-855-546-3351 for an RA# and
other important details.
The NVR comes with a default IP Address of 192.168.0.240.
For initial configuration please follow the below instructions:
1. There are two ways to configure the NVR, with a direct
Keyboard, Monitor & Mouse connected to the NVR or
using a browser to connect to the NVR over a network.
For configuration over the network open browser to the
default IP Address of 192.168.0.240
2. At initial boot up you will be prompted to create an
Admin password. Once created login to NVR.
3. Login and follow the screen prompts to set, Language,
Time Zone, Date and Time. Click "Continue".
4. The system will automatically search and display
cameras found on the network. The system will request
user name and password for each camera found. Click
"Continue".
5. Click on "Setup Gear" to go to setup screen.
6. On setup menu select Globe icon to set IP Address,
Subnet, Gateway and DNS appropriate for your network.
7. Navigate the other menu selections for additional setting.
8. Download User Manual from linear-solutions.com/
product-manuals/
Secure the Rack Ears to the sides of the chassis by
driving three (3) included screws.
©2022 Nortek Security & Control LLC. All rights reserved.
Linear is a registered trademark of Nortek Security & Control LLC.
USA & Canada Toll Free: 800-421-1587
or dial 760-438-7000
|
