Nortech TD136 User Manual Download Page 5 | Manualshive

Page: 5 / 30

Nortech TD136 User Manual Download Page 5

301UM0031_01

TD136 Enhanced Vehicle Detector User Manual

Page: 4 of 29

WARNING: 1.

This unit must be earthed!

WARNING: 2.

Disconnect power before working on this unit!

WARNING: 3.

Installation and operation by service personnel only!

WARNING: 4.

No user serviceable parts inside. Only service personnel
may open the unit to change internal settings. Warranty
void if cover removed !

WARNING: 5.

Always suspend traffic through the barrier area during
installation and testing that may result in unexpected
operation of the barrier.

WARNING: 6.

USA
FCC Advisory Statement – Refer to Appendix A at the
end of this document.

WARNING: 7.

Europe
Disposing of the product:

This electronic product is subject to
the  EU  Directive  2002/96/EC  for
Waste  Electrical  and  Electronic
Equipment  (WEEE).  As  such,  this
product  must  not  be  disposed  of  at
a  local  municipal  waste  collection
point.

Please

refer

to

local

regulations for directions on how to
dispose of this product in an
environmental friendly manner.

«
...
3
4
5
6
7
...
»

Summary of Contents for TD136































Reviews:

No comments