Nortech N301BCATEX Operating Manual Download Page 7

UNITS COVERED BY THIS MANUAL

30 GALLON CAPACITY          55 GALLON CAPACITY

N301BCATEX       

N551BCATEX                                 

N301BCXATEX     

N551BCXATEX

N301DCATEX       

N551DCATEX

 N552BCATEX
 N552BCXATEX

OPTIONAL EQUIPMENT

PARTS INCLUDED WITH UNIT

Currently no US standards exist to certify non-electrically powered 
equipment, such as pneumatic vacuums, for safe use in hazard-
ous locations. However, Europe has such standards and they are 
known as 

ATEX Directives

. NORTECH engaged SIRA Test & 

Certification, Ltd, a United Kingtom-based, nationally recognized 
testing laboratory, to certify that the above NORTECH Hazardous 
Location Pneumatic Vacuums meet the applicable ATEX Directives. 
After a comprehensive evaluation, SIRA Test & Certification certified 
the above models have the following rating:

ATEX CERTIFICATION

This ATEX rating is equivalent to the following National Fire Protec-
tion Association (NFPA) 70: National Electric Code (NEC) rating:

2

7

II2 GD c IIC T6

Class I     Division 1*    Groups A, B, C, D T6
Class II    Division 1     Groups E, F, G T6
Class III

*Zone 1 only

Replace the cover gasket should it become worn, frayed, or  
ineffective.

Replacement filters, foam inserts, and cover gaskets are available 
directly from NORTECH. 

To convert from a dry vac to a wet vac, remove filter and replace 
with the liquid shut-off assembly as shown above.

WET VACUUM OPTION

Summary of Contents for N301BCATEX









Reviews: