13.56MHz Reader Wiring
Connect the reader cable to the reader port of the controller according to
the table below. For readers with a screw terminal block, refer to terminal
numbering diagram.
Terminal*
Cable
Function
1
Red
+5VDC to +16VDC
2
Black
Ground
3
White
Wiegand Data 1 / Clock
4
Green
Wiegand Data 0 / Data
5
Yellow
Green LED input
6
Brown
Beeper input
7
Blue
Serial Data Output
8
Orange
Format Select (see below)
Format Select:
Use the ‘Format Select’ lead to set the required data output
format by connecting it to either Ground or +VDC as follows:
Reader Variant
Connect to ground
Connect to +VdC
ISO
10-Digit Clock & Data
32-Bit Wiegand
MIF, LEG
Dependant upon the customer specific version
*Terminal Numbering
1 2 3 4 5 6 7 8
