Add a Block of Sequentially Numbered Cards
Press
once. The following screen is displayed:
P r o g r a m C a r d s
Press
to display the first parameter
P r o g r a m C a r d s
F r o m :
Enter the first card number & press
P r o g r a m C a r d s
T o :
Enter the last card number & press
(Simply press
if only one card is to be validated)
P r o g r a m C a r d s
A c c L e v e l : x
Enter the Access Level assigned to the card(s) and
press
(Level 1 = valid on both readers)
P r o g r a m C a r d s
C a p t 1 n o
Use
to toggle between ‘Yes’ or ‘No’ to indicate whether
these cards should be captured at Reader 1 and press
P r o g r a m C a r d s
C a p t 2 n o
Use
to toggle between ‘Yes’ or ‘No’ to indicate whether
these cards should be captured at Reader 2 and press
Press
twice to exit Programming mode
Issue
02
