Nortec Links 2 NHTC, Installation And Operation Manual

Page: 10 / 36

6 | Installation
Table 4: Variable Definitions - CONTINUED
Variable Name
R=Read
W=Write
Description LonWorks SNVT
nvoNetSensor_ x
R
Binary Value
Reads configuration status for
network-enabled sensing or
control.
0=%RH or %demand input is not
from the network
1=%RH or %demand input is from
the network
SNVT_switch
nvoDisable_ x
R
Binary Value
Reads remote disable status.
0=humidifier enabled,
1=humidifier disabled by network
SNVT_switch
nvoSecurity_ x
R
Binary
Indicates security loop status.
0=Sec. loop open,
1=Sec. loop closed
SNVT_switch
nvoService_ x
R
Binary Value
Reads service requirement status.
0=no service required,
1=service required
SNVT_switch
nvoStatus_ x
R
Binary Value
Reads humidifier status.
0=standby, 1=humidifying.
SNVT_switch
nvoConnection_x
R
Binary Value
Indicates that the NORTEC Links
module is communicating with the
Humidifier
SNVT_switch
nviDisable_ x
W
Binary Value
Writes remote disable status.
0=humidifier enabled,
1=humidifier disabled from
network
SNVT_switch
nviNetSensor _ x
W
Binary Value
Writes configuration status for
network-enabled sensing or
control.
0=%RH or %demand input is not
from the network
1=%RH or %demand input is from
the network
SNVT_switch
Table 5: Humidifier Variable Addresses – Unit #1