NORSELIGHT 4036538577789, Installation & User Manual

Page: 11 / 39

11
2.4 Overall dimensions Power supply
For 500-1000W
NP-0725 (for mounting in the motor-house)
This single-phase recti fi er has been designed to ensure correct operation and long life to short
arc Xenon lamps up to 1000W. It is characterized by galvanic insulation, a soft inrush current,
alow residual ripple value and a stable output current. Weight 3,35kg.
Further instructions in Installation guide for Recti
fi er see page 28.
A:180 mm
B:254 mm
H:82,5 mm
Note (1) The switch SW1 must remain in OFF position when the remote ON/OFF signal is
used.
1. Ta 50°C max running time until the searchlight will switch o ff is 2 hours.
2. Ta 45°C max running time until the searchlight will switch o ff is 6 hours.
3. Ta 35°C and less the searchlight is continuously running.
Note: After an automatic safety shutdown of the power supply due to overheating,
the input power of the search light (L,N) has to be interrupted and connected
again for a reset of the power supply.
(Keep the unit with the fan running for a few minutes and disconnect the
mains input for >5 seconds).
Note (2) Put the switch in the ON position to select the lamp power. The rest of switches
must remain in the OFF position.
Setting 500W
Setting 1000W
Setting 3000W