© Norsat International Inc.
(“Norsat”) All Rights Reserved
2021-04-23 039092 Rev C
23
17
4.25
43
10.75
69
17.25
95
23.75
121
30.25
18
4.5
44
11
70
17.5
96
24
122
30.5
19
4.75
45
11.25
71
17.75
97
24.25
123
30.75
20
5
46
11.5
72
18
98
24.5
124
31
21
5.25
47
11.75
73
18.25
99
24.75
125
31.25
22
5.5
48
12
74
18.5
100
25
126
31.5
23
5.75
49
12.25
75
18.75
101
25.25
127
31.75
24
6
50
12.5
76
19
102
25.5
25
6.25
51
12.75
77
19.25
103
25.75
getdat
ok value 23
setdat
This command specifies the Input Digital Attenuation value for the ATOM device. Valid values range from
0 to 127 for
¼
dB step attenuation. Maximum attenuation is 31.75dB. This command applies only to BUCs,
not SSPAs.
setdat value 42
ok
Command Response
The CLI operates on a command response format. Each time a command is entered, a response will be
displayed. If a command executed
correctly, an “ok” along with potential parameters and values will be
displayed. Otherwise, “err” will be displayed along with a description of the error.
The potential errors that may be displayed are:
•
Invalid Command
– The command was not recognized
•
Invalid Parameter
– The parameter was not recognized
•
Invalid Value
– The value was invalid for the command/parameter
•
Missing Parameter
– A required parameter was not provided
Each command response will have the following format:
<CR><LF><msg><CR><LF>
where msg is as described above and in the commands summary and example tables below. Note that a
response is enveloped by leading and trailing <CR><LF> characters.
