ATOM Ka 25-50W BUC & SSPA
Revision 1.3
039092
23
039092_r1.3 - Operator Manual ATOM Ka
25-50W.doc
Section 2.6
E
THERNET
I
NTERFACE
(ATOMC
ONTROL
™
W
EB
I
NTERFACE
)
On units equipped with the Ethernet option, an integrated HTTP Web Server allows the user to access a
web based version of the ATOMControl software to control the unit. To access this application, an
Ethernet link to the ATOM must be established. Refer to
for cable connection details. Once
the cable is fabricated, connect the Ethernet jack to the network (either through an Ethernet switch or
directly to the host computer’s RJ-45 port) and power on the ATOM unit.
D
EFAULT
IP
A
DDRESS
The default IP Address for the ATOM unit is
192.168.77.30
and default the subnet mask is
255.255.255.0
. Ensure the computer’s IP Address is on the same logical network and subnet as the
ATOM unit (e.g. 192.168.77.XXX, where XXX is any number
except
“30”).
A
CCESSING
ATOMC
ONTROL
™
W
EB
I
NTERFACE
The
ATOMControl™ Web Interface is accessed through any web browser such as Mozilla Firefox
(recommended), Google Chrome, Opera, or Internet Explorer. To access the web interface, launch the
web browser and type in the IP Address for the ATOM:
http://192.168.77.30/index.html
A simplified version of the ATOM Control software will load in the browser window.
U
SING
ATOMC
ONTROL
™
W
EB
I
NTERFACE
The Web Interface use and operation is identical to the ATOMControl interface. Refer to the
ATOMControl Software Manual for instructions on how to use the web interface (Norsat document
number INS001219).
C
HANGING THE
ATOM’
S
IP
A
DDRESS
The factory default IP address of the BUC is
192.168.77.30
but it can be user configured through the
Network and Port Configuration
webpage.
To change the ATOM’s IP Address, connect the ATOM as
described above, launch a web browser, and then navigate to the following address:
http://192.168.77.30/index_conf.html
Specify the desired IP Address in the text boxes and then click on the “
Save Settings and Reboot
”
button. Once the web server reboots, the Web Interface will be accessible through the new IP Address
http://<New_IP_Address>/index.html
WARNING: TAKE CARE TO RECORD THE NEW IP
ADDRESS WHEN MAKING CHANGES.
