9
INSTALLTION
NOTE
: Once the Exhaust Hose Assembly and Adjustable Window Slider are prepared, install according
to the type of window you are using.
Figure 4
Figure 5
Figure 6
WINDOW INSTALLATION KIT
1. Preparing the Exhaust Hose Assembly:
Press the exhaust hose into the window
slider adaptor and unit adaptor and clamp
with the buckles of the adaptor.
2. Attach the Exhaust Hose Assembly to the Unit:
Push the Exhaust hose into the air outlet
opening of the unit along the arrow direction.
3. Prepare the Adjustable Window Slider:
Measure the size of your window opening.
If needed, cut the window slider to the
correct length. You may need both window
sliders, in which case, slide Window Slider
B into Window Slider A, adjust to correct
size, and use the bolt to fasten the window
sliders together.
Exhaust Hose
Exhaust Hose Assembly
Unit Adaptor
Bolt
Window
Slider B
Window
Slider A
Window Slider Adaptor
LOCATION
Your installation location should meet the following requirements:
•
Make sure that you install your unit on a level surface to
minimize noise and vibration.
•
The unit must be installed near a grounded plug, and the
Collection Tray Drain (found on the back of the unit) must be
accessible.
•
The unit should be located at least 12” (30cm) from the
nearest wall to ensure proper air conditioning.
•
DO NOT cover the Intakes, Outlets or Remote Signal
Receptor of the unit, as this could cause damage to the unit.
50cm
19.7inch
NOTE:
All the illustrations in the manual are for explanation
purpose only. Your machine may be slightly different.
The actual shape shall prevail.
The unit can be controlled by the unit control panel alone or
with the remote controller. This manual does not include
Remote Controller Operations, see the <<Remote Controller
Instruction>> packed with the unit for details.
Recommend Installation
Figure 3
