System Requirements
To use the TTX81X, you need a computer with a vacant 16-bit ISA slot,
and Windows 95, 98 or NT.
Installation
1. With the power off and the power cord unplugged, remove the cover
from your computer, following the manufacturer’s instructions.
2. Locate an unused “16-bit ISA slot” in the computer. If you are unsure
what this means, look closely at the computer’s bus connectors. There
is only one type which will accept the TTX81X; it will not fit in other
connectors such as “PCI”. If there are 2 or more empty ISA slots, try
to leave one slot vacant on each side of the TTX81X; this will ensure
the best possible data reception.
3. Remove the blank mounting bracket from the selected slot, and retain
the screw for later use.
4. Ensure that the “DIP switches” on the TTX81X are all in the OPEN
position, which is how they are set at the factory. This is the best
setting for most computers, since it allows the software to set up the
card automatically.
5. Insert the TTX81X into the connector for the desired slot;. some
pressure will normally be required. Align the hole in the upper edge of
the TTX81X mounting bracket with the screw hole and replace the
screw you removed in step 3.
6. Replace the computer’s cover and apply power.
