10
TECHNICAL INFORMATION >>
Do not attempt to take apart the system.
The system has no user-serviceable parts. There are no user-replaceable fuses.
BLUETOOTH WIRELESS TECHNOLOGY
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc., and any use of such marks by NormaTec is under license.
In the unlikely event of loss of a stable Bluetooth connection, the system will attempt to re-establish its connection automatically.
The NormaTec device is completely autonomous, and will continue operating normally, even during a loss of connectivity. If this
device does cause interference, which can be determined by turning the device off and on, the user is encouraged to try to
correct the interference by reorienting or relocating the device, increasing the separation between equipment and the device, or
connecting the device to a different outlet on a circuit if it is plugged in.
The NormaTec PULSE 2.0 device uses Bluetooth 5.0 wireless technology with the following radio specifications:
Frequency
2.36 to 2.5 GHz
Modulations
GFSK at 1 Mbps, 2 Mbps data rates
Transmit Power
+4 dBm
Receiver Sensitivity
BMD-300/301: -96 dBm (BLE mode) BMD-350: -94 dBm (BLE mode)
Security
AES-128
Contains Rigado, Inc. BLE Module BMD-300-A-R, FCC ID: 2AA9B04, IC ID: 12208A-04
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur
de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
onctionnement.
INTERNAL BATTERY INFORMATION
This device is equipped with a rechargeable lithium ion battery. The internal battery is designed to allow use of the NormaTec
PULSE 2.0 anywhere—even when power outlets aren’t available. The NormaTec PULSE 2.0 may need to be plugged in before
first use. The battery will provide power for 2+ hours of continuous use. It takes approximately 6 hours to fully charge the
battery when the device is plugged in and not in use.
The rechargeable lithium ion battery is intended to be changed only by authorized service personnel with the use of a special
service tool.
PRODUCT SPECIFICATIONS
• PULSE 2.0 Dimensions: 4” (width), 4.5” (depth), 8” (height); [10.2 cm (width), 11.43 cm (depth), 20.32 cm (height)]
• PULSE 2.0 Weight: 3.6 lbs [1.63 kg]
• PULSE 2.0 electrical requirement: 15V
DC 1 A
• Temperature (operating): +41° F to 104° F [+5° C to +40° C]
• Temperature (storage): -13° F to +158° F [-25° C to +70° C]
• Relative Humidity (operating): 15% to 93%, non-condensing
• Relative Humidity (storage): -25˚ C without relative humidity control; +70˚ C at relative humidity up to 93%, non-condensing
