Assembly Instructions Puff Table Lamp Twist
6
General Instructions
Please note the information contained in these instructions and save this manual, also when the lamp is
already mounted.
Safety precautions:
• Electrical connections may only be carried out by qualified staff.
• The manufactures do not accept responsibility for injuries or defects caused by improper use of this
lamp.
• Attention! Before starting the installation, disconnect the power by turning off the circuit breaker, or
by removing the fuse at the fuse box.
• Mind to use this lamp for its predetermined function. For example don’t mount indoor lamps in
outdoor areas.
• Please check all components are complete before installing.
• Don’t cover the lamp.
• Don’t connect the lamp to power and don’t switch it on when it’s in packing.
• Bulbs and transformers get very hot during operating. At improper use there is the risk of fire and by
changing the bulb you can hurt yourself. Always let cool down!
• If the external flexible cable or cord is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualified person in order to avoid a hazard.
• Please ensure that the specified bulb type and power of bulb is used. The maximal wattage
shouldn’t be exceeded (find the bulb symbol and the ”max ... W” on rating label or on the lamp).
• Do not mount the lamp on wet or conducting background.
• Make sure that the cables or cords don’t get damaged during installation.
• The given main voltage (220-240V ~ 50-60Hz) shall not be exceeded.
• Plug and connection elements must be free of tensile strength and torsion force.
• Don’t touch bulbs with bare hands.
• If the product is damaged, please contact Normann Copenhagen for replacements.
Maintenance instructions:
• Before cleaning, disconnect the power by turning off the circuit breaker, or by removing the fuse at
the fuse box.
• Mind to clean the surfaces of the lamp only.
• Wetness shouldn’t get in terminal box or to any conducting part.
• Let the lamp cool down for 10 minutes before cleaning.
• Clean the lamp with a soft dry, cloth only.
Advice for environmental care:
Please don’t dispose of this article in normal domestic waste after the end of its lifecycle.
Instead, we advise that you dispose of it according to local environmental laws for waste disposal.
The materials are recyclable according to their specifications. With the correct recycling of these materials,
you can make a significant contribution to environmental protection.
The battery must be removed from the lamp and disposed of according to local environmental laws before
disposing of the lamp.
CE marking:
By affixing the CE marking to a product, a manufacturer declares that the product meets all the legal
requirements for CE marking and can be sold throughout the European Economic Area (EEA).