background image

Outdoor Vent Kit Installation and Instruction Manual

 Do not connect electrical power to the unit until all electrical 

wiring has been completed.

  

1. National Electrical Code

2. National Fuel Gas Code

3.   In Canada, CSA C22.1 Canadian Electrical Code 

Part 1, and CGA No. B149 (latest version)

4.  Local, state, provincial, and national codes, laws, 

regulations, and ordinances.

5.  In the State of California: The water heater must 

be braced, anchored, or strapped to avoid moving 

during an earthquake. Contact local utilities for 

code requirements in your area or call 866-766-7489 

and request instructions.

6. In the Commonwealth of Massachusetts:

   a. Outdoor units may be used for summer use only.

   b.  The water heater may be used for hot 

water heating only and may not be used in a 

combination of domestic and space heating.

Installation Must Comply With

This water heater must be installed by a qualified and licensed personnel. The installer should be guided by 

the instructions furnished with the water heater, and by local codes and utility company requirements.

CAUTION

This manual is intended to be used in conjunction with 

other literature provided with the water heater. 

This manual includes all related control information.

 

It is important that this manual, all other documents 

included in this system be reviewed in their entirety 

before beginning any work.

 

Installation should be made in accordance with the 

regulations of the Authority Having Jurisdiction, local 

code authorities, and utility companies which pertain to 

this type of water heating equipment.

Important

This installation manual includes information specific to outdoor water 

heater installations. This information is meant to replace the venting 

section included in the tankless water heater installation manual. 

The tankless water heater installation manual includes instructions 

that will be necessary for the proper installation of all other functions, 

such as water and gas piping, wall mounting, control programming, etc. 

Failure to follow these instructions could result in substantial property 

damage, severe personal injury, or death. This installation shall be done 

by a qualified service agency in accordance with these instructions, all 

applicable codes, and requirements of the authority having jurisdiction. 

Failure to follow these instructions could result in substantial property 

damage, severe personal injury, or death.

WARNING

Note:

The manufacturer reserves the right to make changes or updates without notice and will not be held liable for errors in 

literature.

PLEASE KEEP ALL INSTRUCTIONS FOR FUTURE REFERENCE.

Applicable for NRCP111/98 series only.

Kit# VCK-NRCP-1

Rev.02/19

Summary of Contents for VCK-NRCP-1












Reviews: