9
* The
indicator is lit.
* The previously set hot water
supply temperature is shown.
[For systems with recirculation operation]
*
If you set the
button to "ON",
recirculation operation is automatically started.
(If "Synchro ON/OFF" was set to "ON".(
p.18))
* The setting temperature displayed
may vary from the actual temperature
at the fixture depending on conditions
such as season or length of piping.
*
During operation, the symbol
may be continuously lit.
1
2
Turn on hot water.
Lit during combustion
Check
(Ex.: 40°C)
Turn off hot water.
Unlit
DANGER
High Temperature
To prevent scalding :
Hot Water Heater temperatures over 50°C can cause severe burns
instantly or death from scalding.
For All Systems
Using the Water Heater
*
If
is displayed, hot water
will be discharged at the temperature of the
storage tank.
For systems with recirculation operation,
is displayed here.
button is "ON".
Turn off the hot water
Operation
Screen Display
Description
• Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, ask a professional person.
• When setting the unit to 55°C or higher, “Hi temp” will
fl
ash for 10 seconds and emit a tone as a high
temperature warning.
• Take caution when using the unit again after setting to 50°C or higher. Always check the set temperature
before use.
• Do not allow anyone to change the water temperature while hot water is running.