3
Installing the Pipe Cover
1. Pre-Assemble Frame before installation
2. Install Pipe Cover onto Water Heater
1) Assemble the Front Cover Bracket (
④
) to the
one of the Frame Bracket 1 (
⑥
).
2) Assemble this Frame Bracket 1 (
⑥
) assembled
Front Cover Bracket to the Left and Right Plate
(
②,③
) with Screws (
⑨
).
3) Secure the two Frame Brackets 1, 2 (
⑥,⑦
) to
the Left and Right Plate (
②,③
) with Screws (
⑨
).
1) Remove the mounting 4 screws (A) from the
bottom and sides of the appliance. Refer to
Figure 1.
2) Install the two Case Bottom Brackets (
⑤
) to
the bottom of the appliance with the 4 screws
(A) removed in step 1). Refer to Figure 2.
3) Slide the Pipe Cover assembly onto the
bottom of the appliance. Align the mounting
holes and temporarily mount the Pipe Cover
with the 4 screws (
⑨
). Refer to Figure 3.
4) The 'back' bottom Frame Bracket 1(
⑥
) inserts
into the temporarily mounted Pipe Cover.
Mark the locations to attach the Pipe Cover to
the wall onto the 'back' bottom Frame Bracket
1(
⑥
).
5) Remove the Pipe Cover from the wall and
then drill two holes on the wall as marked.
For drywall, drill two 3/16-in. holes (other wall
material must be required alternate mounting
details).
5
A
A
A
A
5
Figure 1
Figure 2
2
3
9
9
9
9
9
9
6
4
7
6