manualshive.com logo in svg

Noritz ecoTough NRC83-OD, Field Manual

Share
Download
Noritz ecoTough NRC83-OD Field Manual Download Page 25

              (Ex.: AM10:15)
Normally the clock display is not shown when
the power ON/OFF button is "OFF".
* This setting can be changed so that the clock is displayed
  even when the power button is turned "OFF".  

*  The screen display shown below is for illustration purposes only. 
  The actual display will vary depending on how the water heater is being used.
*  After a button is pressed, the display will gradually become darker to prevent unnecessary power consumption 

by the remote controller.

(Ex.: 110°F)

The  flame  symbol  is  displayed  during 
combustion  when  using  hot  water  or 
recirculation functions.

A number will flash if a 
failure occurs. 

<Home Screen Example>

Screen Display 

What is the home screen?

The home screen is displayed when the 

 button is "ON".

Normally, the hot water temperature and the clock, etc. are displayed.

Flame Symbol

During normal operation, the set 
temperature is displayed.

Display for Recirculation Operation

Display for High Temperature

Temperature Setting 

Clock Display

Error Code

*  For systems that use recirculation operation, the symbol 

is displayed when the power ON/OFF button is set to "ON".

*  It is displayed during the recirculation operation. 

Display for Temperature Setting

The  lock  symbol  is  displayed 
when  the  remote  controller  is 
locked. 

Locked Display

The clock symbol is displayed 
when the recirculation timer is 
activated. 

Recirculation Timer

Displays when the set temperature
is 125°F/55°C (131°F) or higher. 

Note: As shipped from the factory, the remote controller is set to display in °F and gallons. 
         To adjust the display to °C and liters, refer to the Installation Manual.

Remote Controller (RC-9018M)

25

Summary of Contents for ecoTough NRC83-OD












































Reviews:

No comments

Brands by name

Popular brands

Load more brands