Norelco QuadraAction 6890XL Manual Download Page 5

4.

LCD DISPLAY

The display provides the following information:

Charging Indicator
As soon as you connect cord,the light in display area 
goes ON,the plug symbol appears and the minute 
indicator starts blinking.

Full Charge Indicator
When batteries have been fully charged,“FULL” scrolls 
across the display and light in display starts blinking.

Minutes Left Indicator
The number on the display shows remaining shaving time 
in minutes.The “squares” in the charge meter indicate 
how much power is still left in batteries.

Low Battery Indicator
When the batteries are running low, the plug symbol will 
blink after you have turned the razor OFF. If this occurs 
while shaving, you should have enough power to 

complete your shave.

When you turn razor ON or OFF, the light in the LCD 
Display will come ON for approximately 10 seconds.

The razor has a 1-minute demonstration program that 
will run through the full display of razor functions.To

activate, press and hold the ON/OFF button in for a few

seconds until all symbols appear on the display.You can 
interrupt  the demonstration by pressing the ON/OFF 
button again.

5.

Cleaning Indicator
The blinking faucet symbol reminds you that razor heads 
need to be cleaned and appears approximately once a 
week (in the case of normal use).

CHARGE METER

1

Charge Meter monitors amount of remaining battery
power and actual remaining shaving minutes available.
“Minutes Left” is based on the amount of power 
consumed shaving per minute and is dependent upon 
your skin and beard type , whether you use pre-shave
lotion,shaving habits and how often the trimmer is used.

2

Initially your razor may need to go through 2 or 3 full 
charge/recharge cycles before “Minutes Left” indicator 
begins to display your accurate “Shaving Minutes Left”.

3

The squares in the charge meter indicate how much 
power is left in the batteries.

CHARGING

Battery performance is best if you recharge only when 
the batteries are (almost) completely empty.

Charging or recharging at temperatures below 40ºF or 
higher than 95ºF adversely affects lifetime of batteries.

Continuously recharging or continuously using as a 
corded razor will reduce life of batteries.

You may also shave using the cord provided.This razor 
will not recharge while being used corded.

Recharge only when plug symbol starts blinking.This 
symbol may appear when your razor is ON or OFF.

Summary of Contents for QuadraAction 6890XL










Reviews: