Norelco 8170XLCC Manual Download Page 7

ENGLISH

13

ENGLISH

12

Before First Use

Charge the razor before you start using it
(see ‘Charging’). Make sure the razor is
switched off before you start charging it.

Important

Only use the power plug and/or Jet Clean
System provided to charge the razor.

The charging plug converts 100 – 240V AC to
less than 24V DC.

Charging

Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.

Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.

Continuously recharging or continuously using
as a corded razor will reduce life of batteries.

You may also shave using the cord provided.
This razor will not recharge while being used
corded.

Do not charge razor in a pouch.

Recharge only when the bottom light on the 
display lights up red.

Do not charge/recharge or use razor corded 
until fully dried.

5 LED Battery Level Indicators

The meter provides the following information:

LED Battery Charge Meter

The lights on the display indicate approximately
how much power is left in the batteries.

C

Charging Indicator

When you charge razor, the bottom light on the
display blinks red. It will then turn green and
blink. As charging continues, more and more
lights of the display meter will light up green to
indicate what level of the batteries have been
charged.When the battery contains enough
power for one shave, all lights start blinking green
sequentially.

Full Charge Indicator

When the batteries have been fully charged, all 
the lights on the display will light green. A few
hours after charging, all lights will go out.

Remaining Battery Capacity

The remaining battery capacity is shown when you
unplug the razor or when you switch it on or off.
-  When all lights are green, the battery is 

100% charged.

- When the bottom light is green, 20% of the 

battery capacity is left.

C

Low Battery Indicator

When the battery is running low, the bottom light
on the display lights up red. When you turn the
razor OFF, the bottom light will blink a few times.

Summary of Contents for 8170XLCC


















Reviews: