Important
C
◗
Only use the power plug provided to charge
the razor.
◗
The power plug transforms 100-240V AC to
12V DC.
◗
An adaptor plug may be necessary for cord
usage in some foreign countries.Your new razor
will automatically convert internally to work on
100V to 240V AC systems.
Charging
◗
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
◗
Battery performance is best if you recharge
only when batteries are (almost) completely
empty.
C
1
Connect the cord to razor. Plug the
charging plug into any 100V to 240V AC
outlet. Use only the charging plug
provided.
2
First time charging and recharging after
non-use for 1 month or more requires a
full 8 hours.
C
3
The green LED charging indicator will light
up to indicate razor is (re)charging.
Recharging
◗
After initial charge, recharging normally takes 8
hours.
ENGLISH
10
◗
A fully charged razor has cordless shaving time
of up to approx. 40 minutes.
Inserting the First Cartridge
C
1
Take one lotion or gel cartridge.Take the
connector supplied and remove it from
the little bag. Push it into the plastic cap of
cartridge until it locks into position with a
click.
C
2
Push the release button on the back of
razor downwards and open the cover of
the cartridge compartment.
C
3
Slide the cartridge with the connector in
place into the razor. It only fits properly if
the white side of the connector is pointing
upwards. Close the cover.
4
Press the applicator button a few times
until the Nivea for Men shaving lotion or
gel appears in the small hole located on
razor head assembly.The razor is now
ready for use.
Replacing Cartridges
C
1
Open back cover of razor.
2
Remove empty cartridge, pull out and save
the connector. DO NOT discard the
connector.
ENGLISH
11