11
Program Schedule Usage
This thermostat contains customizable energy-
saving schedules (also called events) that can
adjust the heating/cooling system 2 or 4 times a
day on individual days, every day, just weekdays,
just weekends, an entire week or a combination
of days. Residential systems can be setup for a
2 event or 4 event per day schedule. Companies
can set their schedule to 2 events per day using
the business option. By default, this thermostat
is factory set to a 4 Schedule Events/Day. If
the nonprogrammable option or other event
schedule is desired, then this setting must be
changed before programming the thermostat.
NOTE: Full programmable operation may be resumed
by performing steps 1 - 9 below and selecting a
programmable option in the program schedule
usage menu. Programmable and nonprogrammable
options in this thermostat do not apply to iQ Zone
systems with zone control enabled.
ADVANCED THERMOSTAT SETTINGS
The iQ Drive Thermostat features additional fi ne-tuning options that can increase comfort, save energy,
and maximize the performance of the heating and cooling system. These settings are optional and do
not require modifi cation for the heating/cooling system to operate. However, some of these settings may
require the consultation of an installer for determining which settings will achieve peak performance.
1. Select MENU on the Main Screen using the
or
button.
2. Press the
button.
3. Select SETTINGS
using the
or
button.
4. Press the
button.
5. Select OPTIONS using
the
or
button.
6. Press the
button.
NOTE:
The OPTIONS
menu will appear in the display with an event
beneath EVENTS PER DAY already selected.
7. Press the
button.
8. Change the event using the
or
buttons.
9. Press the
button to save the setting.
Nonprogrammable Option
The nonprogrammable option disables the
usage of all programming schedules, Smart
Recovery, and temperature holds. It requires no
programming and is as basic as operating an old
manual style rotary thermostat.
To use this option, perform steps 1 - 9 below
and select NONPROGRAMMABLE in step 8. To
activate an air conditioner, furnace, or heat pump,
place the thermostat in an operating mode as
described on page 6. Adjust the temperature by
simply pressing the
or
buttons anywhere
on the Main Screen (or by accessing the TEMP
menu on the Main Screen). When the desired
temperature setting is displayed, press the
button to save the setting.
Programmable Options
4 Schedule Events/Day
• WAKE: The temperature setting in the morning
when everyone wakes up.
• LEAVE: The temperature setting for the time
away from home and energy savings are
wanted.
• RETURN: The temperature setting in the
evening when everyone returns home.
• SLEEP: The temperature setting at night when
everyone is asleep.
2 Schedule Events/Day
• DAY: The temperature setting during daylight
hours.
• NIGHT: The temperature setting during night
time hours.
2 Events/D Business
• ACTIVE: The temperature setting during
business hours.
• IDLE: The temperature setting when business
is closed.
